painterdecorator.tradePost a job

Guide

How much paint do I need?

Work out the wall area, then divide by the coverage on the tin. See typical coverage for emulsion, masonry and woodwork paint, plus a Dulux example.

Drawing of a room with one wall half painted, a roller on a pole and a paint tray

Measure the wall area

Multiply the height of each wall by its width to get its area in square metres. Add the walls together. Then work out each door and window the same way, and take that total away.

For example, a wall 4 m wide and 2.5 m high is 10 square metres. Dulux suggests multiplying the final area by two if you are painting two coats, which is the usual number for walls.

Emulsion for walls and ceilings

Most wall emulsions cover about 12 to 14 square metres a litre, per coat. Some trade vinyl matts give up to 17. Dulux gives up to 13 square metres a litre for its Easycare matt, and up to 17 for Dulux Trade Vinyl Matt, in two coats. Its Simply Refresh One Coat Matt gives up to 10 square metres a litre, in one coat.

These are "up to" figures. Rough or very absorbent walls take more paint, so you may get less from a tin than the label says.

Masonry paint for outside walls

Masonry paint is made for brick, render and pebbledash. On smooth walls, makers give about 12 to 16 square metres a litre. Dulux gives up to 16 for its Weathershield smooth masonry paint, and two full coats are normal.

Textured walls take much more. Dulux gives 4 to 6 square metres a litre on textured surfaces such as pebbledash, and Sandtex gives up to 6.5 on pebbledash, roughcast and render. A pebbledashed house needs a lot more paint than a smooth one of the same size.

Gloss and satinwood for woodwork

Gloss and satinwood for skirting boards, doors and frames cover about 12 to 15 square metres a litre. Dulux Trade Quick Dry Satinwood gives up to 12 in two full coats. Dulux Trade Quick Dry Gloss gives up to 12, and for a strong colour change it suggests three coats. One maker gives 15 for a trade gloss.

Fresh plaster and the mist coat

Dulux says to thin the first coat on fresh plaster, called a mist coat, with 10 parts paint to 1 part water. Johnstone's also says its vinyl matt can be thinned with clean water for absorbent surfaces.

The makers do not give a coverage figure for a mist coat, so check the tin or ask at the shop.

A worked example and your quote

Dulux gives its own examples on its website. About 1 litre covers a 2.5 m feature wall. About 2.5 litres covers the walls of a 2 m by 2 m room. About 5 litres covers the walls of a 4 m by 4 m room.

If you hire a decorator, their quote usually includes the paint or says that it does not. Ask which it is, so you know whether to buy it yourself.

Common questions

How many coats of paint do I need?

Two coats is normal for walls, and makers work out coverage on two coats. Dulux gives a one-coat emulsion that covers up to 10 square metres a litre. A strong colour change may need more coats.

Why does the tin say "up to"?

Coverage depends on the wall. Texture and how absorbent the surface is lower the figure, so your wall may use more paint than the tin suggests.

How much paint do I need for a 4 m by 4 m room?

Dulux's own example gives about 5 litres for the walls of a 4 m by 4 m room. Ceilings and woodwork need extra paint.

Where to go from here

Find a painter and decorator near you